Urban-ITS — Air quality management in urban areas



As cities and urban complexes expand, and there is a significant trend from rural areas to cities around the world, pollution in these urban areas becomes an ever more significant problem. Traffic - vehicle movements within the urban complex - is not the only polluter, but is considered to be a major source of pollution. Other causes are air conditioning/central heating systems, coal and wood burning heating, factories, etc.

Air pollution has a major impact on human health. It is associated with a range of deadly diseases including cancer, heart disease, strokes and asthma, and is the number one environmental cause of death in the EU, responsible for more than 430,000 early deaths in 2012 alone. More than one fifth of the EU urban population are exposed to air pollution which exceeds EU limit values. As of 2013, exceedances of the PM10 daily limit value were registered in 22 EU Member States, while 19 remained in breach of limits for NO2. In theory, citizens in all those countries could go to court to demand that action is taken. In reality, national rules and procedures often make it very difficult for them to do so.

EU law provides citizens with some possible solutions to these difficulties, by guaranteeing them rights to certain procedures. Domestic courts are obliged to give effect to EU law, even if this involves setting aside incompatible national laws. Domestic courts must give effect to EU law rights by providing effective remedies.

This project provides guidance and identifies requirements and options on how to set up a policy and how to deploy reliable and scalable technologies to monitor air quality on continuous or regular basis and to react with adequate measures. This provides a means to measure the air quality required by relevant EU directives.



The most recent directive relating to ambient (outdoor) air quality is the DIRECTIVE 2008/50/EC of 21 May 2008 on ambient air quality and cleaner air for Europe (the "Directive"), which was adopted in 2008 [13], and requires member states to:

— Monitor and assess air quality to ensure that it meets these objectives;
— Report to the Commission and the public on the results of this monitoring and assessment;
— Prepare and implement air quality plans containing measures to achieve the objectives.

This objective of this project is to provide a means for urban administrations to demonstrate their progress to, and achievement of, EC required air quality.


This project will providee information, guidance and specifications of requirements and options on how to set up an air quality (emissions) management policy, and how to deploy reliable and scalable technologies to monitor air quality on a continuous or regular basis, and to react with adequate measures.
This document defines technological concepts that provide reliable and open data, and defines the functional requirements on measurement devices that produce such data. This provides a means to measure the air quality required by relevant EU directives.

This document provides information and specifications enabling to specify air quality levels for triggering a scenario. Specifically, this specification provides a toolkit of parameters and data definitions that a regulator can use to e.g.
— define proper air quality measures, suitable for a street, zone or the whole city
— inform a driver in advance of entry to a Controlled zone about air quality level and related policy measures expected to be in operation at a given time, e.g. higher parking price per location due to the adverse air quality; and of the time windows of the measure operation of the controlled zone
— inform the relevant city departments on the introduced measure, air quality levels and number of vehicles entered.

In order to maximise European harmonisation, it is recommended that this specification is used in combination with a module of standardised data concepts, i.e. an "air quality management data dictionary" (AQMDD), however, this version of this document, which is focussed on policies and procedures, does not provide these data concept specifications.